Rear Main Seal Installation

The Tools and Instructions
Sometime you may need to replace your rear main seal.  You can do this in the field if you have the right tool and the instructions. If you can get the tool, here are the instructions.
The Skinny
First, you need to get the proper tool  It is made by OTC and I found ours on ebay.  This is the 2nd one I've owned.  I let the first one go when I sold our Spec Racer in 1998. This just goes to show you that the old racer's adage "Never sell your tools." is right.  Anyway, when you have the right tool, then you need to know how to use it.  The instructions are not in the shop manual...but are reprinted below for your use.

Rev. 11/10/06
I welcome your comments or ideas on this information.  Feel free to drop me a line via “Comments and Feedback”.  

Barry Mumm

Return_flag.gif (5765 bytes)